PDS Tech Commercial Inc, is seeking candidates for an Digital and Analog Circuits and Power Supply Design, Level 3 & 4 positions in Oklahoma City, OK.

　　Job Title: Digital and Analog Circuits and Power Supply Design 3 & 4

　　Job Type: Full time; Consultant (12 Months)

　　Location: Oklahoma City, OK

　　Positions Available: 2

　　Pay Rate: $62 per hour (Level 3) & $81 (Level 4)

　　Job Description

　　Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.

　　Develops high-level and detailed designs consistent with requirements and specifications.

　　Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.

　　Supports Supplier Management with make/buy recommendations and other technical services of limited scope.

　　Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

　　Works under general direction.

　　Primary job responsibilities will include:

　　Develop requirements management processes and tools and investigate actions necessary for requirements definition and flow-down improvement

　　Perform and document design of complex electronic and electrical solutions ranging from Circuit Card Assemblies to Box-Level Assemblies in models and tools while guiding less experienced engineers in development and performance of the designs

　　Develop certification criteria and methods with regulatory agencies

　　Lead, organize and resolve cross-divisional problems to provide technical assistance to internal/external customers

　　Assure cost, time effective, creative solutions and disposition of issues to assure customer satisfaction

　　Perform a wide variety of complex trades studies to meet program requirements

　　Lead work to modify, test, and validate that hardware and software system designs meet operational and functional requirements

　　Lead the review of supplier and partner qualification data, the development of enclosure and LRU Design, and the Analysis of custom manufacturing as well as integration of COTS components within the design

　　Lead activities in support of Supplier Management with make/buy recommendations and other technical services

　　Support project management by tracking and reporting project status, by generating bids and requirements, and by providing work statement, budget, and schedule.

　　Other job responsibilities may include:

　　Lead analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products

　　Lead development of high-level and detailed designs consistent with requirements and specifications

　　Identify, track, and status technical performance measures to measure progress and ensure compliance with requirements

　　Plan research projects to develop concepts for future product designs to meet projected requirements

　　Research specific technology advances for potential application to company business needs

　　Develop automated test equipment to support aircraft test requirements

　　Basic Qualifications (Level 3)

　　Must possess a Bachelors degree in engineering, engineering technology, engineering physics or physics.

　　Must have previous experience in the defense or aerospace industry

　　Must have at least 3 years of Experience in analyzing and translating requirements into system architecture, hardware and/or software design and interface specifications

　　Must have at least 3 years of previous experience with DOORS Requirements Management Tool or similar

　　Must be willing to travel up to 25% of the time as required

　　Preferred Qualifications (Level 3)

　　5 or more years related work experience (Career Level)

　　An ABET accredited Bachelors degree in electrical engineering or a Masters/PhD in electrical engineering

　　Active U.S. Security Clearance

　　Knowledge of digital signal processing

　　Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition

　　Previous experience in Circuit design, including some of the following:

　　Embedded processors

　　High end FPGAs, SOC FPGAs, state-of-the-art memory devices

　　Standard communications and storage protocols

　　Low power FPGAs, CPLDs

　　Power sequencing, monitoring, management

　　Previous experience with developing and coordinating supplier design requirements

　　Previous experience with system and circuit level fault isolation

　　Previous experience with box level and card level test planning and procedures

　　Experience with MS Office tool suite

　　Experience developing and delivering presentations (verbal and/or written) to key stakeholders

　　Basic Qualifications (Level 4)

　　Must possess a Bachelor’s degree in engineering, engineering technology, engineering physics or physics.

　　Must have previous experience in the defense or aerospace industry

　　Must have at least 3 years of Experience in analyzing and translating requirements into system architecture, hardware and/or software design and interface specifications

　　Must have at least 3 years of previous experience with DOORS Requirements Management Tool or similar

　　Must be willing to travel up to 25% of the time as required

　　Preferred Qualifications (Level 4)

　　An ABET accredited Bachelor’s degree in electrical engineering or a Master’s/PhD in electrical engineeringActive U.S. Security Clearance

　　Knowledge of digital signal processing

　　Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition

　　Previous experience in Circuit design, including some of the following:

　　Embedded processors

　　High end FPGAs, SOC FPGAs, state-of-the-art memory devices

　　Standard communications and storage protocols

　　Low power FPGAs, CPLDs

　　Power sequencing, monitoring, management

　　Previous experience with developing and coordinating supplier design requirements

　　Previous experience with system and circuit level fault isolation

　　Previous experience with box level and card level test planning and procedures

　　Experience with MS Office tool suite

　　Experience developing and delivering presentations (verbal and/or written) to key stakeholders

　　Pay Details: $62.00 to $81.00 per hour

　　Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.

　　Equal Opportunity Employer/Veterans/Disabled

　　To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy

　　The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.