Description/Job Summary

　　PLEASE REFER TO THE JOB GRADE ON THE JOB POSTING PAGE FOR THE APPROPRIATE JOB DESCRIPTION.

　　Electrical Technician: Position Grade B

　　Position Objective

　　To perform all duties assigned, which fall under the maintenance area of responsibility

　　Qualifications

　　High school diploma or equivalent.

　　Vocational education desirable

　　Previous maintenance experience required - Min. of 1 year

　　Ability to read and interpret blueprints and schematics

　　Good oral and written communication skills

　　Training

　　No training needed, previous experience preferred

　　Authority / Decision Making

　　None

　　Duties & Responsibilities

　　Task and Duties

　　Must have regular, reliable attendance, and willing to work outside the regular schedule as required.

　　Willing to handle job stress and interact with others in the workplace

　　Consistently demonstrates safe work habits

　　Adhere to all company rules and policies

　　Has complete understanding of the plant and department safety rules

　　Demonstrates good housekeeping by ensuring his or her assigned area is kept clean.

　　Works efficiently with other employees in order to meet plant and department goals in safety, quality, production and housekeeping

　　Follows oral and written instructions from higher management

　　Works and cooperates with other departments within the plant

　　Attends scheduled department safety and training meetings

　　Ability to receive constructive suggestions

　　Ability to troubleshoot equipment, i.e. FMC bag machine and winder, kiefel extruder and winder, amplast unwinder, ktron resin system.

　　Comply with all written and verbal safety rules using personnel protective equipment as required by department and plant safety programs.

　　Plan and carry-out tasks to accepted national and local standards and codes.

　　Identify and correct, in a timely manner, problems in all areas of the plant including production equipment, material handling equipment, etc. to within accepted codes.

　　Ability to coordinate and lead small work groups to complete assigned tasks.

　　Check voltage with volt meter.

　　Install bearings and deals in electrical motors of all sizes.

　　Replace electrical motors (AC and DC)

　　Do PMS on electrical equipment

　　Troubleshoot and replace heater bands

　　Replace and repair if possible heat controls.

　　Troubleshoot replays, starters, circuit breakers and replace when needed.

　　Be able to bend rigid or EMT pipe

　　Check and replace fuses.

　　Read dial and venire calipers.

　　Be able to read metric and standard measurements

　　Check and repair or replace when necessary thermocouples

　　Must know about resin systems

　　Must know how to download and reload computers.

　　Must be able to repair faulty wiring.

　　Identify and understand the function of equipment

　　Provide timely preventive maintenance support and records all test data

　　Ability to properly fill out necessary paperwork associated with work orders, historical files, time cards and issues tickets.

　　Must have and properly select tools required for task being performed

　　Able to disassemble equipment make necessary repairs and restore to normal operations.

　　Ability to train other personnel effectively

　　Planning and achieve job tasks in a timely manner

　　Ability to seek method by which to improve department efficiency

　　Available for overtime, call-ins and rotating schedule

　　Willingness to learn and upgrade skill level.

　　Performs other related duties as assigned

　　Provide timely preventive maintenance support coordinating with production personnel

　　Responsible for good housekeeping in assigned and work areas.

　　Make any mechanical repairs on equipment as necessary

　　Check voltage with volt meter

　　Check amperes with amprobe

　　Read electrical and construction schematics pertaining to electrical

　　Understand electrical diagrams

　　Troubleshoot electrical motors

　　Check out and troubleshoot DC drives

　　Troubleshoot relays, starters, circuit breakers and replace when needed.

　　Must know how to troubleshoot and repair solid state circuitry

　　Must be able to install starters, wiring, etc. in panels

　　Must know all wires sizes and voltage and amp ratings.

　　Machinery and Electrical Devices

　　Electronic & Mechanical devices

　　Forklift

　　Hand jack

　　Tape measure

　　Utility knife

　　Safety (J) knife

　　Physical and Visual Activity Required

　　Physical

　　Climbing, ascending or descending ladders, stairs, ramps, and the like, using feet and legs and / or hands arms. Body agility is emphasized.

　　Balancing, maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces.

　　Stooping, bending body downward and forward by bending spine and waist.

　　Kneeling, bending legs at knee to come to a rest on knee or knees.

　　Crouching, bending the body downward and forward by bending leg and spine.

　　Crawling, moving about on hands and knees or hands and feet.

　　Reaching, extending hand(s) and arm(s) in any direction. Example: giving signal, reaching for material or handles on item

　　Standing, particularly for sustained periods of time.

　　Walking, moving about on foot to accomplish tasks, particularly for long distances.

　　Pushing, using upper extremities to press against something with steady force in order to thrust forward, downward or outward.

　　Pulling, using upper extremities to exert force in order to drag, haul, or tug objects in a sustained motion.

　　Lifting, rising objects from lower to higher position, or moving objects from a higher to lower position, or moving objects horizontally from position to position. Degree of lifting: (26-50 lbs.)

　　Fingering, picking, pinching, typing, or otherwise working primarily with fingers rather than the whole hand or arm as in handling.

　　Grasping, applying pressure to an object with fingers and palm.

　　Feeling, perceiving attributes of objects such as size, shape, temperature, or texture by touching with skin, particularly that of fingertips.

　　Talking, expressing or exchanging ideas by means of spoken word. Via face to face or telephone.

　　Hearing, perceiving the nature of sounds with no less than a 40 db. loss @ 500Hz, 1000Hz, and 2000Hz with or without correction. Ability to receive verbal communication and to make fine discriminations in sound, such as when making fine adjustments on machined parts.

　　Repetitive motions, substantial movements (motions) of the wrists, hands, and / or fingers. Example: Filing, sorting mail, various inspection tests.

　　Visual

　　Machine operation, inspection, clerical, and administrative duties. Example: preparing and analyzing data and figures, data entry, extensive reading, visual inspection involving small defects, using measurements devices close to the eyes.

　　Machine operation and skilled trades, various lab equipment, where seeing at the job is at or within arm's reach.

　　Mobile equipment operations; operate cars, trucks, buses, forklifts, cranes and high lift equipment.

　　Other criteria based on accuracy and neatness of work. Example: lab paper work, and lab environment.

　　Position requires individual to differentiate colors, depth, and perception.

　　Work Environment Conditions

　　Inside environmental conditions, protected from weather conditions, not necessarily temperature conditions.

　　Outside environmental conditions, no effective protection from weather.

　　Inside and outside environments apply.

　　Subject to extreme cold; temperatures below 32 degrees for periods of more than one hour.

　　Subject to extreme heat; temperatures above 100 degrees for more than one hour.

　　Subject to noise, causing reason to shout in order to be heard above the noise level.

　　Subject to vibration exposure, fluctuating movements of the body.

　　Subject to hazard such as moving machine, electrical currents, falling debris, exposure to chemicals, gases, high heat or explosives.

　　Subject to unregulated atmospheric condition caused by odors, fumes, gases, poor ventilation and dusts.

　　Subject to oils and other cutting fluids via touch or air.

　　Air density conditions causing the use of a respirator.

　　Not exposed to any adverse environmental conditions. (Usually office work.)

　　Electrical Technician: Position Grade A

　　Position Objective

　　To perform all duties assigned, which fall under the maintenance area of responsibility

　　Qualifications

　　High school diploma or equivalent.

　　Vocational education desirable

　　Previous maintenance experience required - Min. of 3 years

　　Ability to read and interpret blueprints and schematics

　　Good oral and written communication skills

　　Training

　　No training needed, previous experience preferred

　　Authority / Decision Making

　　None

　　Duties & Responsibilities

　　Task and Duties

　　Must have regular, reliable attendance, and willing to work outside the regular schedule as required.

　　Willing to handle job stress and interact with others in the workplace

　　Consistently demonstrates safe work habits

　　Adhere to all company rules and policies

　　Has complete understanding of the plant and department safety rules

　　Demonstrates good housekeeping by ensuring his or her assigned area is kept clean.

　　Works efficiently with other employees in order to meet plant and department goals in safety, quality, production and housekeeping

　　Follows oral and written instructions from higher management

　　Works and cooperates with other departments within the plant

　　Attends scheduled department safety and training meetings

　　Ability to receive constructive suggestions

　　Ability to troubleshoot equipment, i.e. FMC bag machine and winder, kiefel extruder and winder, amplast unwinder, ktron resin system.

　　Comply with all written and verbal safety rules using personnel protective equipment as required by department and plant safety programs.

　　Plan and carry-out tasks to accepted national and local standards and codes.

　　Identify and correct, in a timely manner, problems in all areas of the plant including production equipment, material handling equipment, etc. to within accepted codes.

　　Ability to coordinate and lead small work groups to complete assigned tasks.

　　Check voltage with volt meter.

　　Install bearings and deals in electrical motors of all sizes.

　　Replace electrical motors (AC and DC)

　　Do PMS on electrical equipment

　　Troubleshoot and replace heater bands

　　Replace and repair if possible heat controls.

　　Troubleshoot replays, starters, circuit breakers and replace when needed.

　　Be able to bend rigid or EMT pipe

　　Check and replace fuses.

　　Read dial and venire calipers.

　　Be able to read metric and standard measurements

　　Check and repair or replace when necessary thermocouples

　　Must know about resin systems

　　Must know how to download and reload computers.

　　Must be able to repair faulty wiring.

　　Identify and understand the function of equipment

　　Provide timely preventive maintenance support and records all test data

　　Ability to properly fill out necessary paperwork associated with work orders, historical files, time cards and issues tickets.

　　Must have and properly select tools required for task being performed

　　Able to disassemble equipment make necessary repairs and restore to normal operations.

　　Ability to train other personnel effectively

　　Planning and achieve job tasks in a timely manner

　　Ability to seek method by which to improve department efficiency

　　Available for overtime, call-ins and rotating schedule

　　Willingness to learn and upgrade skill level.

　　Performs other related duties as assigned

　　Provide timely preventive maintenance support coordinating with production personnel

　　Responsible for good housekeeping in assigned and work areas.

　　Make any mechanical repairs on equipment as necessary

　　Check voltage with volt meter

　　Check amperes with amprobe

　　Read electrical and construction schematics pertaining to electrical

　　Understand electrical diagrams

　　Troubleshoot electrical motors

　　Check out and troubleshoot DC drives

　　Troubleshoot relays, starters, circuit breakers and replace when needed.

　　Must know how to troubleshoot and repair solid state circuitry

　　Must be able to install starters, wiring, etc. in panels

　　Must know all wires sizes and voltage and amp ratings.

　　Machinery and Electrical Devices

　　Electronic & Mechanical devices

　　Forklift

　　Hand jack

　　Tape measure

　　Utility knife

　　Safety (J) knife

　　Physical and Visual Activity Required

　　Physical

　　Climbing, ascending or descending ladders, stairs, ramps, and the like, using feet and legs and / or hands arms. Body agility is emphasized.

　　Balancing, maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces.

　　Stooping, bending body downward and forward by bending spine and waist.

　　Kneeling, bending legs at knee to come to a rest on knee or knees.

　　Crouching, bending the body downward and forward by bending leg and spine.

　　Crawling, moving about on hands and knees or hands and feet.

　　Reaching, extending hand(s) and arm(s) in any direction. Example: giving signal, reaching for material or handles on item

　　Standing, particularly for sustained periods of time.

　　Walking, moving about on foot to accomplish tasks, particularly for long distances.

　　Pushing, using upper extremities to press against something with steady force in order to thrust forward, downward or outward.

　　Pulling, using upper extremities to exert force in order to drag, haul, or tug objects in a sustained motion.

　　Lifting, rising objects from lower to higher position, or moving objects from a higher to lower position, or moving objects horizontally from position to position. Degree of lifting: (26-50 lbs.)

　　Fingering, picking, pinching, typing, or otherwise working primarily with fingers rather than the whole hand or arm as in handling.

　　Grasping, applying pressure to an object with fingers and palm.

　　Feeling, perceiving attributes of objects such as size, shape, temperature, or texture by touching with skin, particularly that of fingertips.

　　Talking, expressing or exchanging ideas by means of spoken word. Via face to face or telephone.

　　Hearing, perceiving the nature of sounds with no less than a 40 db. loss @ 500Hz, 1000Hz, and 2000Hz with or without correction. Ability to receive verbal communication and to make fine discriminations in sound, such as when making fine adjustments on machined parts.

　　Repetitive motions, substantial movements (motions) of the wrists, hands, and / or fingers. Example: Filing, sorting mail, various inspection tests.

　　Visual

　　Machine operation, inspection, clerical, and administrative duties. Example: preparing and analyzing data and figures, data entry, extensive reading, visual inspection involving small defects, using measurements devices close to the eyes.

　　Machine operation and skilled trades, various lab equipment, where seeing at the job is at or within arm's reach.

　　Mobile equipment operations; operate cars, trucks, buses, forklifts, cranes and high lift equipment.

　　Other criteria based on accuracy and neatness of work. Example: lab paper work, and lab environment.

　　Position requires individual to differentiate colors, depth, and perception.

　　Work Environment Conditions

　　Inside environmental conditions, protected from weather conditions, not necessarily temperature conditions.

　　Outside environmental conditions, no effective protection from weather.

　　Inside and outside environments apply.

　　Subject to extreme cold; temperatures below 32 degrees for periods of more than one hour.

　　Subject to extreme heat; temperatures above 100 degrees for more than one hour.

　　Subject to noise, causing reason to shout in order to be heard above the noise level.

　　Subject to vibration exposure, fluctuating movements of the body.

　　Subject to hazard such as moving machine, electrical currents, falling debris, exposure to chemicals, gases, high heat or explosives.

　　Subject to unregulated atmospheric condition caused by odors, fumes, gases, poor ventilation and dusts.

　　Subject to oils and other cutting fluids via touch or air.

　　Air density conditions causing the use of a respirator.

　　Not exposed to any adverse environmental conditions. (Usually office work.)

　　Electrical Technician: Position Grade Senior I

　　Position Objective

　　To perform all duties assigned, which fall under the maintenance area of responsibility

　　Qualifications

　　High school diploma or equivalent

　　Vocational education desirable

　　Previous maintenance experience required

　　Ability to read and interpret blueprints and schematics

　　Good oral and written communication skills

　　Training

　　No training needed, previous experience preferred

　　Authority / Decision Making

　　Oversees Technicians in completing various tasks & duties

　　Duties & Responsibilities

　　Task and Duties

　　Must have regular, reliable attendance, and willing to work outside the regular schedule as required.

　　Willing to handle job stress and interact with others in the workplace

　　Consistently demonstrates safe work habits

　　Adhere to all company rules and policies

　　Has complete understanding of the plant and department safety rules

　　Demonstrates good housekeeping by ensuring his or her assigned area is kept clean.

　　Works efficiently with other employees in order to meet plant and department goals in safety, quality, production and housekeeping

　　Follows oral and written instructions from higher management

　　Works and cooperates with other departments within the plant

　　Attends scheduled department safety and training meetings

　　Ability to receive constructive suggestions

　　Ability to troubleshoot equipment, i.e. FMC bag machine and winder, kiefel extruder and winder, amplast unwinder, ktron resin system.

　　Comply with all written and verbal safety rules using personnel protective equipment as required by department and plant safety programs.

　　Plan and carry-out tasks to accepted national and local standards and codes.

　　Identify and correct, in a timely manner, problems in all areas of the plant including production equipment, material handling equipment, etc. to within accepted codes.

　　Ability to coordinate and lead small work groups to complete assigned tasks.

　　Check voltage with volt meter.

　　Check amperes with amprobe.

　　Read electrical and construction schematics pertaining to electrical

　　Understand electrical diagrams

　　Troubleshoot electrical motors.

　　Install bearings and deals in electrical motors of all sizes.

　　Replace electrical motors (AC and DC)

　　Check out and troubleshoot DC drives

　　Do PMS on electrical equipment

　　Troubleshoot and replace heater bands

　　Replace and repair if possible heat controls.

　　Troubleshoot replays, starters, circuit breakers and replace when needed.

　　Be able to bend rigid or EMT pipe

　　Check and replace fuses.

　　Read dial and venire calipers.

　　Be able to read metric and standard measurements

　　Check and repair or replace when necessary thermocouples

　　Must know about resin systems

　　Must know how to download and reload computers.

　　Must be able to set up and run a job without being supervised.

　　Must be able to install starters, wiring, etc. in panels.

　　Must be able to repair faulty wiring.

　　Must know all wires sizes and voltage and amp ratings.

　　Identify and understand the function of equipment

　　Provide timely preventive maintenance support and records all test data

　　Ability to properly fill out necessary paperwork associated with work orders, historical files, time cards and issues tickets.

　　Must have and properly select tools required for task being performed

　　Able to disassemble equipment make necessary repairs and restore to normal operations.

　　Perform job task without supervision

　　Ability to train other personnel effectively

　　Planning and achieve job tasks in a timely manner

　　Ability to seek method by which to improve department efficiency

　　Available for overtime, call-ins and rotating schedule

　　Willingness to learn and upgrade skill level.

　　Performs other related duties as assigned

　　Provide timely preventive maintenance support coordinating with production personnel

　　Responsible for good housekeeping in assigned and work areas.

　　Make any mechanical repairs on equipment as necessary

　　Must know how to troubleshoot and repair solid state circuitry

　　Must be able to lay out panels and design wiring schematics

　　Design or modify circuits, controls or components when needed

　　Machinery and Electrical Devices

　　Electronic & Mechanical devices

　　Forklift

　　Hand jack

　　Tape measure

　　Utility knife

　　Safety (J) knife

　　Physical and Visual Activity Required

　　Physical

　　Climbing, ascending or descending ladders, stairs, ramps, and the like, using feet and legs and / or hands arms. Body agility is emphasized.

　　Balancing, maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces.

　　Stooping, bending body downward and forward by bending spine and waist.

　　Kneeling, bending legs at knee to come to a rest on knee or knees.

　　Crouching, bending the body downward and forward by bending leg and spine.

　　Crawling, moving about on hands and knees or hands and feet.

　　Reaching, extending hand(s) and arm(s) in any direction. Example: giving signal, reaching for material or handles on item

　　Standing, particularly for sustained periods of time.

　　Walking, moving about on foot to accomplish tasks, particularly for long distances.

　　Pushing, using upper extremities to press against something with steady force in order to thrust forward, downward or outward.

　　Pulling, using upper extremities to exert force in order to drag, haul, or tug objects in a sustained motion.

　　Lifting, rising objects from lower to higher position, or moving objects from a higher to lower position, or moving objects horizontally from position to position. Degree of lifting: (26-50 lbs.)

　　Fingering, picking, pinching, typing, or otherwise working primarily with fingers rather than the whole hand or arm as in handling.

　　Grasping, applying pressure to an object with fingers and palm.

　　Feeling, perceiving attributes of objects such as size, shape, temperature, or texture by touching with skin, particularly that of fingertips.

　　Talking, expressing or exchanging ideas by means of spoken word. Via face to face or telephone.

　　Hearing, perceiving the nature of sounds with no less than a 40 db. loss @ 500Hz, 1000Hz, and 2000Hz with or without correction. Ability to receive verbal communication and to make fine discriminations in sound, such as when making fine adjustments on machined parts.

　　Repetitive motions, substantial movements (motions) of the wrists, hands, and / or fingers. Example: Filing, sorting mail, various inspection tests.

　　Visual

　　Machine operation, inspection, clerical, and administrative duties. Example: preparing and analyzing data and figures, data entry, extensive reading, visual inspection involving small defects, using measurements devices close to the eyes.

　　Machine operation and skilled trades, various lab equipment, where seeing at the job is at or within arm's reach.

　　Mobile equipment operations; operate cars, trucks, buses, forklifts, cranes and high lift equipment.

　　Other criteria based on accuracy and neatness of work. Example: lab paper work, and lab environment.

　　Position requires individual to differentiate colors, depth, and perception.

　　Work Environment Conditions

　　Inside environmental conditions, protected from weather conditions, not necessarily temperature conditions.

　　Outside environmental conditions, no effective protection from weather.

　　Inside and outside environments apply.

　　Subject to extreme cold; temperatures below 32 degrees for periods of more than one hour.

　　Subject to extreme heat; temperatures above 100 degrees for more than one hour.

　　Subject to noise, causing reason to shout in order to be heard above the noise level.

　　Subject to vibration exposure, fluctuating movements of the body.

　　Subject to hazard such as moving machine, electrical currents, falling debris, exposure to chemicals, gases, high heat or explosives.

　　Subject to unregulated atmospheric condition caused by odors, fumes, gases, poor ventilation and dusts.

　　Subject to oils and other cutting fluids via touch or air.

　　Air density conditions causing the use of a respirator.

　　Not exposed to any adverse environmental conditions. (Usually office work.)

　　Electrical Technician: Position Grade Senior II

　　Position Objective

　　To perform all duties assigned, which fall under the maintenance area of responsibility

　　Qualifications

　　High school diploma or equivalent

　　Vocational education desirable

　　Previous maintenance experience required

　　Ability to read and interpret blueprints and schematics

　　Good oral and written communication skills

　　Training

　　No training needed, previous experience preferred

　　Authority / Decision Making

　　Oversees Senior I & technicians in completing various tasks & duties

　　Duties & Responsibilities

　　Task and Duties

　　Must have regular, reliable attendance, and willing to work outside the regular schedule as required.

　　Willing to handle job stress and interact with others in the workplace

　　Consistently demonstrates safe work habits

　　Adhere to all company rules and policies

　　Has complete understanding of the plant and department safety rules

　　Demonstrates good housekeeping by ensuring his or her assigned area is kept clean.

　　Works efficiently with other employees in order to meet plant and department goals in safety, quality, production and housekeeping

　　Follows oral and written instructions from higher management

　　Works and cooperates with other departments within the plant

　　Attends scheduled department safety and training meetings

　　Ability to receive constructive suggestions

　　Ability to troubleshoot equipment, i.e. FMC bag machine and winder, kiefel extruder and winder, amplast unwinder, ktron resin system.

　　Comply with all written and verbal safety rules using personnel protective equipment as required by department and plant safety programs.

　　Plan and carry-out tasks to accepted national and local standards and codes.

　　Identify and correct, in a timely manner, problems in all areas of the plant including production equipment, material handling equipment, etc. to within accepted codes.

　　Ability to coordinate and lead small work groups to complete assigned tasks.

　　Check voltage with volt meter.

　　Check amperes with amprobe.

　　Read electrical and construction schematics pertaining to electrical

　　Understand electrical diagrams

　　Troubleshoot electrical motors.

　　Install bearings and deals in electrical motors of all sizes.

　　Replace electrical motors (AC and DC)

　　Check out and troubleshoot DC drives

　　Do PMS on electrical equipment

　　Troubleshoot and replace heater bands

　　Replace and repair if possible heat controls.

　　Troubleshoot replays, starters, circuit breakers and replace when needed.

　　Be able to bend rigid or EMT pipe

　　Check and replace fuses.

　　Read dial and venire calipers.

　　Be able to read metric and standard measurements

　　Check and repair or replace when necessary thermocouples

　　Must know about resin systems

　　Must know how to download and reload computers.

　　Must be able to set up and run a job without being supervised.

　　Must be able to install starters, wiring, etc. in panels.

　　Must be able to repair faulty wiring.

　　Must know all wires sizes and voltage and amp ratings.

　　Identify and understand the function of equipment

　　Provide timely preventive maintenance support and records all test data

　　Ability to properly fill out necessary paperwork associated with work orders, historical files, time cards and issues tickets.

　　Must have and properly select tools required for task being performed

　　Able to disassemble equipment make necessary repairs and restore to normal operations.

　　Perform job task without supervision

　　Ability to train other personnel effectively

　　Planning and achieve job tasks in a timely manner

　　Ability to seek method by which to improve department efficiency

　　Available for overtime, call-ins and rotating schedule

　　Willingness to learn and upgrade skill level.

　　Performs other related duties as assigned

　　Provide timely preventive maintenance support coordinating with production personnel

　　Responsible for good housekeeping in assigned and work areas.

　　Make any mechanical repairs on equipment as necessary

　　Must know how to troubleshoot and repair solid state circuitry

　　Must be able to lay out panels and design wiring schematics

　　Design or modify circuits, controls or components when needed

　　Machinery and Electrical Devices

　　Electronic & Mechanical devices

　　Forklift

　　Hand jack

　　Tape measure

　　Utility knife

　　Safety (J) knife

　　Physical and Visual Activity Required

　　Physical

　　Climbing, ascending or descending ladders, stairs, ramps, and the like, using feet and legs and / or hands arms. Body agility is emphasized.

　　Balancing, maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces.

　　Stooping, bending body downward and forward by bending spine and waist.

　　Kneeling, bending legs at knee to come to a rest on knee or knees.

　　Crouching, bending the body downward and forward by bending leg and spine.

　　Crawling, moving about on hands and knees or hands and feet.

　　Reaching, extending hand(s) and arm(s) in any direction. Example: giving signal, reaching for material or handles on item

　　Standing, particularly for sustained periods of time.

　　Walking, moving about on foot to accomplish tasks, particularly for long distances.

　　Pushing, using upper extremities to press against something with steady force in order to thrust forward, downward or outward.

　　Pulling, using upper extremities to exert force in order to drag, haul, or tug objects in a sustained motion.

　　Lifting, rising objects from lower to higher position, or moving objects from a higher to lower position, or moving objects horizontally from position to position. Degree of lifting: (26-50 lbs.)

　　Fingering, picking, pinching, typing, or otherwise working primarily with fingers rather than the whole hand or arm as in handling.

　　Grasping, applying pressure to an object with fingers and palm.

　　Feeling, perceiving attributes of objects such as size, shape, temperature, or texture by touching with skin, particularly that of fingertips.

　　Talking, expressing or exchanging ideas by means of spoken word. Via face to face or telephone.

　　Hearing, perceiving the nature of sounds with no less than a 40 db. loss @ 500Hz, 1000Hz, and 2000Hz with or without correction. Ability to receive verbal communication and to make fine discriminations in sound, such as when making fine adjustments on machined parts.

　　Repetitive motions, substantial movements (motions) of the wrists, hands, and / or fingers. Example: Filing, sorting mail, various inspection tests.

　　Visual

　　Machine operation, inspection, clerical, and administrative duties. Example: preparing and analyzing data and figures, data entry, extensive reading, visual inspection involving small defects, using measurements devices close to the eyes.

　　Machine operation and skilled trades, various lab equipment, where seeing at the job is at or within arm's reach.

　　Mobile equipment operations; operate cars, trucks, buses, forklifts, cranes and high lift equipment.

　　Other criteria based on accuracy and neatness of work. Example: lab paper work, and lab environment.

　　Position requires individual to differentiate colors, depth, and perception.

　　Work Environment Conditions

　　Inside environmental conditions, protected from weather conditions, not necessarily temperature conditions.

　　Outside environmental conditions, no effective protection from weather.

　　Inside and outside environments apply.

　　Subject to extreme cold; temperatures below 32 degrees for periods of more than one hour.

　　Subject to extreme heat; temperatures above 100 degrees for more than one hour.

　　Subject to noise, causing reason to shout in order to be heard above the noise level.

　　Subject to vibration exposure, fluctuating movements of the body.

　　Subject to hazard such as moving machine, electrical currents, falling debris, exposure to chemicals, gases, high heat or explosives.

　　Subject to unregulated atmospheric condition caused by odors, fumes, gases, poor ventilation and dusts.

　　Subject to oils and other cutting fluids via touch or air.

　　Air density conditions causing the use of a respirator.

　　Not exposed to any adverse environmental conditions. (Usually office work.)