Summary This position is located in Everglades National Park, in the Facility Management Division. Open to the first 100 applicants or until 02/02/2024 whichever comes first. All applications submitted by 11:59 (EST) on the closing day will receive consideration. Responsibilities Serves as a Civil Engineer on the staff of the Design & Construction Branch. Responsible for planning, design and construction of new and renovation/rehabilitation, repair, or modernization of existing park buildings and facilities. Assignments involve performance of office and field engineering duties associated with in-house design development, architectural/engineering review, managing A/E contracts, and/or monitoring and managing construction projects with diverse climatic, geographic, and environmental conditions. Applies the latest design and construction techniques to such projects as drainage systems, roads, piers, docks, boardwalks, wastewater collection, treatment and disposal/reuse facilities, and potable water supply, treatment and distribution facilities. Other projects include renovation and construction of various types of structures, such as administrative, housing, and storage office buildings, visitor centers, maintenance facilities, laboratories, parking facilities, campgrounds, storage facilities, and entrance stations. Investigates, formulates, and evaluates project data; conducts investigations of project site. Develops complete working drawings, including floor plans, interior and exterior elevations, sections, to include scale and full-size details of park facilities and structures. Evaluates design and construction objectives, identifies most economical and efficient procedures for building or facility repair, renovation, design, and construction, including in-house design, coordinating with other architects and/or engineers in coverage of all technical areas, resolving overlapping responsibilities among technical disciplines concerning attention to design, and meeting total facility objectives and schedules. Requirements Conditions of Employment U.S. Citizenship required. Appointment subject to background investigation and favorable adjudication. Meet Selective Service Registration Act requirement for males. Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program. You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License and Driving Record. You must also submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that disclose all valid driver's licenses, whether current or past, possessed by you. You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided. You may be required to work on-call, evenings, weekends, holidays, overtime and shift work. If you are a new employee or supervisor in the Federal government, you will be required to complete a one-year probationary period. You may be required to travel overnight away from home up to 2 nights per month. You must obtain a government charge card for travel purposes. You may be required to complete training and obtain/maintain a government charge card with travel and/or purchase authority. You will be required to complete a Confidential Financial Disclosure Report, OGE-450 on an annual basis. Applicants must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program. Qualifications All qualifications must be met by the closing date of this announcement-02/02/2024-unless otherwise stated in this vacancy announcement. Credit will be given for all appropriate qualifying experience. To receive credit for experience, your resume MUST clearly indicate the nature of the duties and responsibilities for each position, starting and ending dates of employment (month/year), and the resume must reflect full and/or part-time or total number of hours worked (i.e., work 40+ hours a week, rather than indicating full-time). If part-time, the hours must be annotated to be able to pro-rate the amount qualified specialized experience. To qualify for this position at the GS-12 grade level, you must possess the following minimum qualifications by close of the announcement: Basic Requirement: Most possess this in addition to the additional experience below to qualify for the position.(A) A degree in Engineering. To be acceptable, the program must:(1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (MUST SUBMIT TRANSCRIPTS) -OR- Combination of education and experience -- college-level education, training, and/or technical experience that furnished a thorough knowledge of the physical and mathematical sciences underlying engineering, and a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) (MUST SUBMIT TRANSCRIPTS) In addition to the above, applicants must also possess the following: SPECIALIZED EXPERIENCE: At least one full year of specialized experience comparable in scope and responsibility to the GS-11 grade level in the Federal service (obtained in either the public or private sectors). This experience includes activities such as: Develops civil engineering project construction drawings, technical specifications, cost estimates, and applies professional engineering principles, concepts, practices, procedures of project development and project management, monitoring engineering project activities and reporting results. You must include hours per week worked. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education To qualify based on education, you must submit a legible copy of transcripts from an accredited institution with your name, school name, credit hours, course level, major(s), and grade-point average or class ranking. Transcripts do not need to be official, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work. If you are using education completed in foreign colleges or universities to meet qualification requirements, you must show that your education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. Additional Information This notice is being issued to recruit personnel to occupations for which a severe shortage of candidates exists and/or a critical hiring need has been identified. To assist in filling these positions, OPM has granted agencies "Direct Hire Authority". A Recruitment Incentive May Be Authorized for a newly selected employee when appointed to a permanent, temporary, or term position. A Federal employee who is transferring to the National Park Service from another component, bureau or Federal agency and who does not meet the conditions under 5 CFR 575.102 is not eligible for a recruitment incentive. A Relocation Incentive May Be Authorized for a Federal employee when the employee must move, as directed by the National Park Service (NPS) either through a management directed reassignment or selection for employment, to a different location at least 50 miles away from the one where his/her position of record held at time of selection is currently located, due to a need of the NPS. A relocation incentive is not the same as a Permanent Change of Station (PCS) move and, as such, may be granted in conjunction with one another. This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate. Physical Demands: The work regularly combines both office and field assignments. Field work requires physical exertion, such as long periods of standing, or recurring and considerable walking, stooping, bending, crouching, crawling, and climbing such as in regular and periodic construction activities and field inspections. Work may also include frequent lifting of moderately heavy items weighing less than 50 pounds. Field assignments may also involve driving motor vehicles to work sites, some of which may be remote, and include overnight stays in remote locations. Working Conditions: The work is usually performed in an office setting. However, work time may also be spent periodically visiting field sites. Field sites are typically performed in either an outdoor setting subject to weather changes, diverse terrain, and safety hazards associated with working around complex features and/or construction, or an industrial setting subject to noise, fumes, and moving machinery. Both settings may require the use of personal protective equipment. Safety precautions and protocols are observed at all times and the incumbent complies with safety instructions and regulations and ensures individual and others' safety by promptly reporting unsafe acts, unsafe conditions, and accidents to the supervisor.