Job Description Summary

　　Set-up and operate molding machines in accordance with standard procedures. Maintain an acceptable level of production, quality and housekeeping in accordance with Good Manufacturing Practices.

　　Essential Functions:

　　• Verify correct set-up of molds, presses and auxiliary equipment before machine start up. Establish proper molding conditions. Obtain mold approval at the appropriate time.

　　• Assist with the set-up and maintenance of auxiliary equipment, including granulators, conveyors, liquid temperature controls, and mold electrical controls.

　　• Make minor repairs to machines and equipment and notify proper personnel of necessary major repairs.

　　• Assist Mold Attendants as time permits and help relieve other Molding Technicians for breaks and fills in during personnel shortages.

　　• Assist Supervisor with training programs for new employees.

　　• Responsible and accountable for: achieving adequate production levels, maintaining the expected product quality, and keeping area clean and in order.

　　• Familiar with all the department's inspection procedures and standards. Responsible for the regular and periodic monitoring of product for acceptable quality to the most recent specification.

　　• Maintain records and prepare legible reports, including SPC reports, QC inspection reports, housekeeping checklists, mold cavity data sheets, production downtime reports, cycle time sheets and problem/corrective action logs, etc. accordance with departmental standards and Quality System Standards.

　　• Observe all safety and environmental procedures and Good Manufacturing Practices.

　　• Work with limited supervision and maintain an atmosphere of cooperation among and between shifts, mold repair shop, quality control, and management to facilitate departmental goals.

　　Additional Responsibilities:

　　• Perform miscellaneous duties as required by the Supervisor

　　Education / Experience / Knowledge / Skills:

　　• Minimum requirements for this position include a High School Diploma or GED equivalent and a minimum of 2 years mechanical experience in industrial/manufacturing environment.

　　• Completed coursework in following subjects required (relevant experience may be substituted for individual courses): Schematics, Basic Principles of Mechanics, Introduction to Industrial Technology, Basic Thermoplastic Injection Molding, and Advanced Thermoplastic Injection Molding.

　　• Requires following WorkKeys™ scores prior to employment start: Applied Math-4; Applied Technology-4; Locating Information-5; Observation-4; Reading for Information-5; Teamwork-4.

　　• Requires general knowledge of plastic materials and processes; general knowledge of mold design and operation; good knowledge of injection molding processes; understanding of hydraulic circuits as applied to injection molding machines; and knowledge of auxiliary equipment involved in injection molding.

　　• Must have strong mechanical skills along with initiative and ability to work with minimum supervision.

　　• Must be proficient in use of computers to generate product tickets and make data entries.

　　• RJG Master Molder 1 Certification preferred.

　　• Experience with SAP preferred.

　　• Experience with high volume, high speed, high cavitation, and medical device molding preferred.

　　Job Description

　　We are the makers of possible

　　BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

　　We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us.

　　Set-up and operate molding machines in accordance with standard procedures. Maintain an acceptable level of production, quality and housekeeping in accordance with Good Manufacturing Practices.

　　Essential Functions:

　　Verify correct set-up of molds, presses and auxiliary equipment before machine start up. Establish proper molding conditions. Obtain mold approval at the appropriate time.

　　Assist with the set-up and maintenance of auxiliary equipment, including granulators, conveyors, liquid temperature controls, and mold electrical controls.

　　Make minor repairs to machines and equipment and notify proper personnel of necessary major repairs.

　　Assist Mold Attendants as time permits and help relieve other Molding Technicians for breaks and fills in during personnel shortages.

　　Assist Supervisor with training programs for new employees.

　　Responsible and accountable for: achieving adequate production levels, maintaining the expected product quality, and keeping area clean and in order.

　　Familiar with all the department's inspection procedures and standards. Responsible for the regular and periodic monitoring of product for acceptable quality to the most recent specification.

　　Maintain records and prepare legible reports, including SPC reports, QC inspection reports, housekeeping checklists, mold cavity data sheets, production downtime reports, cycle time sheets and problem/corrective action logs, etc. accordance with departmental standards and Quality System Standards.

　　Observe all safety and environmental procedures and Good Manufacturing Practices.

　　Work with limited supervision and maintain an atmosphere of cooperation among and between shifts, mold repair shop, quality control, and management to facilitate departmental goals.

　　Additional Responsibilities:

　　Perform miscellaneous duties as required by the SupervisorEducation / Experience / Knowledge / Skills:

　　Minimum requirements for this position include a High School Diploma or GED equivalent and a minimum of 2 years mechanical experience in industrial/manufacturing environment.

　　Completed coursework in following subjects required (relevant experience may be substituted for individual courses): Schematics, Basic Principles of Mechanics, Introduction to Industrial Technology, Basic Thermoplastic Injection Molding, and Advanced Thermoplastic Injection Molding.

　　Requires following WorkKeys™ scores prior to employment start: Applied Math-4; Applied Technology-4; Locating Information-5; Observation-4; Reading for Information-5; Teamwork-4.

　　Requires general knowledge of plastic materials and processes; general knowledge of mold design and operation; good knowledge of injection molding processes; understanding of hydraulic circuits as applied to injection molding machines; and knowledge of auxiliary equipment involved in injection molding.

　　Must have strong mechanical skills along with initiative and ability to work with minimum supervision.

　　Must be proficient in use of computers to generate product tickets and make data entries.

　　RJG Master Molder 1 Certification preferred.

　　Experience with SAP preferred.

　　Experience with high volume, high speed, high cavitation, and medical device molding preferred.

　　For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

　　At BD, we strive to make healthcare a priority for our associates and their families. We have a variety of plans including a new HSA Basic plan option with Cigna.

　　$0 payroll contributions if your salary is below $50,000

　　Plan covers 100% preventative care (annual wellness exam, and immunizations)

　　Visit any provider

　　If you meet the eligibility and enrollment requirements, your coverage begins on your date of hire or the date you become a benefits-eligible associate.

　　BENEFITS:

　　BD provides comprehensive total rewards benefits for all of its employees. Most benefits start on day 1 of your employment with BD.

　　Competitive pay

　　Up to 6 weeks of paid parental leave

　　Medical, dental, and vision insurance plans

　　Education assistance ($5250.00 per year)

　　Adoption assistance

　　401K plan with $.75 of every dollar matched up to 6% of compensation

　　Basic life and AD&D provided

　　Discounted home, auto, and pet insurance plans

　　Paid holidays and vacation (pro-rated the first year based on actual start date)

　　Excited to grow your career?

　　We value our talented employees, and whenever possible strive to help one of our associates grow professionally before recruiting new talent to our open positions. If you think the open position you see is right for you, we encourage you to apply!

　　Our people make all the difference in our success.

　　Why Join Us?

　　A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.

　　To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

　　To learn more about BD visit https://bd.com/careers

　　Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

　　Primary Work Location

　　USA NE - Columbus (West)

　　Additional Locations

　　Work Shift

　　Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.