Belvac's proven technology is utilized worldwide in the 2 piece aluminum beverage can industry. With over 60 years of innovation in the industry, Belvac has provided their customers with sustainable solutions. Supplying can makers with Cupping, Body making, Trimming, Decorating, Bottom Rim Coating, Necking, Shaping and inspection technology. Our machinery is utilized in the beverage, food, beauty, and aerosol industry worldwide. Belvac is dedicated to providing customers with the highest performing machinery for the lowest cost of operation. With over 300 employees across seven locations worldwide, Belvac is able to support customers in real time in over 150+ countries.

　　General Function: Set up and operate numerically controlled machines to perform series of machining operations, such as turning, milling, boring, threading and facing on parts according to work instructions and procedures to assure Belvac's quality of work is upheld.

　　Physical Requirements:

　　Requires long periods of standing (up to 10 hours/day)Must be able to operate overhead cranesAlthough all production areas have overhead cranes, on occasion Manufacturing, Stockroom and Assembly employees may choose to lift items by hand for convenience. It is the responsibility of all employees to follow correct lifting techniques and seek help or utilize mechanical lifting aids as appropriate to avoid potential injury.Requires good eye, hand coordinationRequires use of hand tools, files, sanders and grinders

　　Primary Responsibilities Labor grade 2 CNC Machinist C:

　　It is every BPM, Inc. Employee's responsibility to be aware of and work with Belvac's current documented Quality Management System as it pertains to their job requirementsProvides information to make new set-up sheets correct errors in process and set-up sheets Reads prints, job order, tooling instructions or standard charts to determine product specifications, work-holding arrangement, cutting speeds, feed rates and cutting tools to be usedKnow set-ups/fixtures and use ofObserves numerical displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates and speeds of machining cuts.Lifts parts manually or with hoist and positions and secures it in fixtureCalls down a programUse of appropriate measuring equipmentEstablishes zero reference point on part, such as at intersection of two edges or over hold location.Follow established Safety Policies and ProceduresPerform preventative maintenance on machine center and related equipment.Deburr/Part mark as neededOperates at least one CNC machineAll employees performing a work sequence on any work order are required to physically move and transact the material to the next sequence once their task has been completed.All employees utilizing dispatch sheets shall run jobs in date sequence without exception, unless directed otherwise by cognizant Manager and/or Production Planners.It is every employee's responsibility to improve processes to reduce set-up and run-time standards. This shall be a performance measure during all employee evaluations.Must keep assigned machine(s) and work area cleaned and neat.May fasten part in holding fixture mounted on machine table or clamp jog or template in position on part.Use of vises, parallels, stopsEffective use of fixturesSelection and use of tool holdersProper clamping techniquesUses precision tools, such as micrometers and caliber'sSelects speeds and feedsAdjust machine table to align spindle over point, using dial indicator

　　Principal Working Relationship:

　　Reports To: Manager, Parts Processing

　　Coordinates activities with:

　　Education: HS Diploma or Equivalent Certificate

　　Experience:

　　All preceding criteria, criteria at next level and time in grade requirement of one year (minimum) must be met before eligible for promotion to Labor Grade 3 CNC Machinist B

　　Primary Responsibilities for Labor Grade 3 CNC Machinist B:

　　Identifies proper tooling and checks instrumentation according to process sheetsMakes new set up sheets for new jobsSelect and installs preset tooling Selects and installs preset tooling in tool posts, turrets or indexing heads and automatics tool change magazine, in sequence specified on process sheetReviews program to make sure that it is consistent with printMay operate machine manually throughout first piece operation to verify accuracy of setup.Observes numerical displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates and speeds of machining cuts.Inspects first-run piece and spot-checks succeeding pieces for conformance to specifications, using micrometers and precision dial gaugesAbility to read programsMay set tools before positioning them in machine, using precision gauges and instrumentsUse of machine dials, machine readout, measuring equipmentKnow and utilize the program prove out procedureIdentifies proper tooling and checks instrumentation according to process sheetsUnderstand/correction of machine alarmsRecognize tool wearVerifies location and dimensions of holes, using measuring instruments, such as dial indicator, gauge blocks, telescoping gauge and internal micrometerRequired to run at least two functionally different CNC Machining Centers, i.e. CNC lathe/CNC millEdit program when neededMust run multiple machines.Use of tooling types/applications

　　All preceding criteria, criteria at next level and time in grade requirement of two years (minimum) must be met before eligible for promotion to Labor Grade 4 as a CNC Machinist A

　　Primary Responsibilities Labor Grade 4 CNC Machinist A:Selects and sets cutting speeds; feed rates, depth of cut and cutting tool according to machining instructions or knowledge of metal propertiesWorks to tolerances as close as +/- 0.0003 inchMay work only from printStudies prints, sequence of operation and set-up requirementsMay lay out reference lines and machining locations on part, according to print, using layout tools, such as rule, divider and scriber, applying knowledge of shop mathematics and layout techniquesMay sharpen tools on bench grinderTurns dials and switches to override control and correct machine performance, applying practical knowledge of lathe operation.Studies dispatch sheet and organizes materials for next run during automatic CNC-controlled cycles to shorten changeover timeUse of indexes, boring heads, rotary tablesProficient in programming knowledge.Operator must run at least 3 functionally different pieces of CNC equipment, i.e. CNC lathe/CNC horiz. mill/ CNC vert.mill /CNC grinderWork Arrangement : Onsite

　　Salary Range : -

　　We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.

　　This position may be located in:Americas : United States : New York : Alfred

　　Sub Division :Belvac United States

　　Job Requisition ID :52364

　　Job Function : Manufacturing & Operations

　　All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

　　Minimum Salary: 31200.00Maximum Salary: 31200.00Salary Unit: Yearly