Home
/
Comprehensive
/
CIVIL ENGINEER
CIVIL ENGINEER-March 2024
Naval Research Laboratory
Mar 27, 2026
About CIVIL ENGINEER

  Summary You will serve as a Civil Engineer in the Research and Development Services, Code 353500 of NAVAL RESEARCH LABORATORY. Responsibilities You will use sound civil engineering judgment to identify potential facility projects. You will research and review facility inspection reports, service request submission logs, facility planning studies, facility engineering studies and facility master plans. You will propose facility projects to correct the identified deficiencies. You will develop technically complex facility project concepts. Requirements Conditions of Employment Qualifications In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the (GS-05/10) grade level or pay band (NP-02) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate most or all of the following duties: 1.) Identifying potential facility projects; 2.) Developing technically complex facility project concepts; 3.) Submitting completed facility project documentation for maintenance, repair, and construction projects; 4.) Researching and reviewing facility inspection reports, service request submission logs, facility planning studies, facility engineering studies and facility master plans to identify facilities that are not meeting the mission requirements. and 5.) Proposing facility projects to correct the identified deficiencies. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: I have successfully completed a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR I have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In lieu of specialized experience listed in the Qualifications section, applicants may qualify based on equivalent combination of education and experience, as follows: Successfully completing a master's or equivalent graduate degree. https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/students/federal-occupations-by-college-major/ OR Successfully completing two full years of progressively higher graduate level education leading to a master's degree. https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/students/federal-occupations-by-college-major/ OR A combination of experience and education as described above that equates to one year of experience. My percentage of the required education plus my percentage of the required experience equal one hundred percent A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information. Additional Information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

Comments
Welcome to zdrecruit comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments
SIMILAR JOBS
Information Governance and Privacy Specialist
Job Summary This role is ideal for a subject matter expert in the compliant and responsible use of data in the delivery of pharmacovigilance. You will be a key team member on IQVIA’s Research and Dev
CAREGIVER (Part-time)
Our Company ResCare Community Living Overview Are you driven to serve and help others in your community? Caregivers and Direct Support Professionals (DSP) are the heart of our company with their comp
Principal Product Manager
High-impact product leadership opportunity in Microsoft Teams. Join us as we take Microsoft Teams, the fastest growing business application in the history of Microsoft, to the next level. We are look
Standort Controller (m/w/d) - REF33801W
Continental entwickelt wegweisende Technologien und Dienste für die nachhaltige und vernetzte Mobilität der Menschen und ihrer Güter. Das 1871 gegründete Technologieunternehmen bietet sichere, effizi
Army Reserve Administrator
Summary About the Position: This is a military technician position with the 377th Theater Sustainment Command, 706 Transportation Company, 633 Quartermaster Company, 354 Quartermaster Group, 310 Sust
IT Support Engineer - Summer Intern
Company DescriptionRRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the ind
Technischer Projektleiter - Display Technology (m/w/d) - REF26821L
Continental entwickelt wegweisende Technologien und Dienste für die nachhaltige und vernetzte Mobilität der Menschen und ihrer Güter. Das 1871 gegründete Technologieunternehmen bietet sichere, effizi
Marine Design Architect-Remote Working Available
Job Family: Customer Services Req ID: 402953 Meet the team - Video (https://www.youtube.com/watch?v=k6mVLaUyO4U) Siemens Digital Industries (DI) is an innovation leader in automation and digitalizati
Workday Certified Financials Delivery Lead
We are… We are a global collective of innovators applying the New every day to improve the way the world works and lives. New doesn’t mean being ahead of the curve; new is pushing forward the curve,
Analytics Engineer
We are the movers of the world and the makers of the future. We get up daily, roll up our sleeves, and build a better world together. At Ford, we believe freedom of movement drives human progress and
Copyright 2023-2026 - www.zdrecruit.com All Rights Reserved