Job Description

　　Position Summary

　　The inside machinist operate in 3 sections: Machining, Valves and Pumps. Responsibilities and functional knowledge varies based on the designated section.

　　All inside machinists are encouraged, but not required, to gain experience in any section other than their designated section.

　　Key Responsibilities & Functional Knowledge

　　This list is representative of the key areas of responsibility and functional knowledge required of a first class mechanic in the Inside Machine shop. A first class mechanic must demonstrate an advanced knowledge of the skills, functional knowledge and abilities required to perform tasks in these and related areas of responsibility.

　　Advanced knowledge means that the mechanic understands how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them independently and teach others how to complete the tasks. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks. A first class mechanic also is expected to strategize independently and problem-solve as appropriate.

　　Machinists Assigned to the Machining Section

　　Operate Machinery - Must know how to operate the following machines safely, and be developing additional skills in the following key areas:

　　Lathes

　　Able to hold tighter tolerances

　　Thread internally and externally

　　Operate and performance maintenance on the following types of lathes:

　　Lathe to 24

　　Lathe over 24

　　Vertical Turrent Lathe

　　Perform basic maintenance on the lathes

　　Milling machines

　　Able to hold tighter tolerances

　　Complete in-line valve repairs

　　Perform basic maintenance on the vertical milling machine

　　Operate vertical mills

　　Trained on the uses of the Horizontal boring mill based on department need (preferred, but not required)

　　Drill presses

　　Operate the drill press

　　Assess the drill presses for basic repairs

　　Perform repairs to the drill presses

　　Grinders

　　Trained on operating and providing maintenance to surface or gate grinders based on department need (preferred, but not required)

　　Flange Facer

　　Operate face flanges on valves and other parts

　　Operate Overhead Crane

　　Able to accomplish rigging of equipment and materials

　　Be able to obtain a crane operators license

　　Machining Tools

　　Operate band saw

　　Operate a micrometer

　　Use precision measuring tools

　　Other

　　Manufacture parts

　　Maintain and repair machinery

　　Repair ship components using more complex blueprints, sketches and sample parts

　　Disassemble, clean, inspect and repair various ships components

　　Assist with in-place machine operations when needed to include: machining, drilling, milling, facing and boring

　　Complete more complex drawings and sketches for use in manufacturing parts mechanical ability

　　Produce machine work at an efficient rate with minimal or no defects that are out of tolerance

　　Plan and accomplish tasks in an efficient manner

　　Machinists Assigned to the Valve Section

　　Operate Machinery Must know how to operate the following machines safely, and be developing additional skills in the following key areas:

　　Lathes

　　Able to hold tighter tolerances

　　Operate the lathe to 24 to manufacture lathes, machine laps, seats and gates

　　Know the basic operations of the Vertical Turrent Lathe to manufacture lathes, machine laps, seats, and gates

　　Assess and provide basic maintenance for lathes

　　Trained in operating and performing maintenance on the Lathe over 24 (preferred, but not required)

　　Milling machines

　　Hold tighter tolerances

　　Accomplish basic in-line valve repairs

　　Know operations of the vertical mill

　　Assess and provide maintenance for the mill

　　Trained on the basic uses of the vertical mill based on department need (preferred, but not required)

　　Drill presses

　　Operate the drill press

　　Assess the drill presses for repairs

　　Make repairs to the drill presses

　　Grinders

　　Gate grinder

　　Operate the gate grinder

　　Know uses of the gate grinder to include grinding gates for valves and fit of the gate for a valve body

　　Provide maintenance and repair for the grinder

　　Trained on operating and providing maintenance to the surface grinders based on department need (preferred, but not required)

　　Flange Facer

　　Work with face flanges on valves and other parts in the shop and on the ship

　　Valve Assembly, Disassembly, Inspection and Repair

　　Perform valve repair procedure

　　Perform work with stencil and mark

　　Assemble valves by following sketches, manuals and/or technical documents

　　Disassemble valves

　　Clean the valve parts without damaging

　　Inspect and repair valves

　　Record findings on a valve sheet before submitting to a supervisor

　　Valve Hydro

　　Test the valve hydro

　　Be present during the check point with supervisor in attendance

　　Valve in line repair

　　Perform valve in line repair on the ship (preferred, but not required)

　　Understand inline repairs

　　Perform basic machining safely

　　Valve Troubleshoot

　　Perform valve repairs and troubleshooting

　　Machining Tools

　　Operate a band saw

　　Operate a micrometer

　　Use precision measuring tools

　　Machinists Assigned to the Pump Section (Specialty section assigned based on shop need and employee skill and ability)

　　Know pump operations

　　Know the mechanics of pump parts

　　Disassemble pumps

　　Clean pumps, without damaging

　　Inspect, troubleshoot and repair pumps

　　Reassemble pumps

　　Test a pump Hydro and conduct final inspection

　　Required Education, Experience, & Skills

　　Education Minimum: High School Diploma/GED

　　Minimum Relevant Experience: 2 to 4 yrs

　　Practical Theory Requirements

　　An Inside Machinist mechanic must demonstrate an advanced understanding of lathe operation, drill press operations, milling machine operations, blueprint reading and layout of projects to be machined.

　　Other Requirements

　　Must be able to read, write and comprehend simple instructions

　　Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form

　　Must be able to calculate and understand units of measure, including fractions and decimals

　　Must know how to measure using a scale and tape measure

　　Must be able to wear applicable PPE (Hard hat, safety goggles, gloves, steel toes shoes, ear protection, respirator when necessary)

　　Must be able to obtain a government access badge

　　This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by the Company (in consultation with the Union, as appropriate) at any time

　　Preferred Education, Experience, & Skills

　　Preferred Relevant Experience: 3 to 5 yrs.

　　The following skills are not required but based on shop need and interest:

　　Stress Relieving

　　Parts and Repair

　　Shaft Straightening

　　Shaft Overhaul

　　Licenses/Certifications:

　　Overhead Crane certification required for all inside machine sections.

　　Level 1 Qualified Certification Tests are offered based on department need and is in accordance with the NAVSEA Standard Item Trainings

　　Pay Information

　　This position is covered under a Collective Bargaining Agreement (CBA), which will determine your wages.

　　Employee Benefits: At BAE Systems, we support our employees in all aspects of their life including health and financial well-being. Benefits for Union employees are governed by a Collective Bargaining Agreement (CBA), so your benefits may differ from those described here. Generally, employees are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, which may include military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.

　　CNC/Conventional Machinist

　　97481BR

　　EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression