Job Description Summary

　　Maintain, diagnose, repair, calibrate, and modify, as assigned, mechanical, electro-mechanical and electronic control systems for CNC machine tools, manufacturing processes, test equipment and other associated equipment. Perform analytical and functionally troubleshoot problems arising in these areas, including those that may result from programming, tooling, set-up, instrumentation, calibration, and other errors. Will be required to assist Manufacturing Engineering in resolving electronic, electrical, mechanical, and related problems while working in a teaming environment. Must actively participate in a team-based environment.

　　Job Description

　　About GE Aerospace

　　Are you ready to elevate your future? You’ll be warmly welcomed at GE Aerospace where we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. You’ll learn and achieve as part of an on-going LEAN transformation. And, most importantly, you’ll share in our pride and purpose that affects the lives of millions around the world.

　　Working at our Wilmington Facility

　　For more than 22 years our manufacturing facilities in Wilmington have helped fuel the growth and success of GE Aerospace. With 600,000 sq2 of manufacturing space and an advanced mix of 300+ CNC machines/ 21 special processes we’re producing high quality rotating parts for commercial and military aircraft engines. When GE Aerospace introduces advanced new technologies like the LEAP and 9x Engines, our team has outstanding opportunities to contribute.

　　The parts and components we manufacture include Blisks, Small Spools, Welded Spools, CFM HPT Disks, and a variety of large parts that can be found in a wide range of today and tomorrow’s high performance engines. We’re the career home of 500+ employees who seek purpose and challenge in their careers. People just like you.

　　Here are just a few of the best reasons you will want to consider us:

　　This position starts at $38.39, with pay progression every year for 6 years.

　　$1.00 an hour shift differential for first 5 years of service, 10% shift differential after 5 years of service.

　　Cost of Living and General Wage increases available.

　　Full Benefits package, including medical, dental, vision starting on Day 1.

　　Vacation, Holidays starting on Day 1. Additional PTO at 1 year of service.

　　Relocation available for offers >90 miles from our facility.

　　ESSENTIAL RESPONSIBILITIES

　　Responsible for installing, maintaining, repairing, calibrating modifying and/or rebuilding a wide variety of CNC machine tools and associated equipment. Must provide accurate documentation of work efforts in both electronic and paper media.

　　Must be able to maintain, repair, adjust and modify complex process equipment and instrumentation. Required to operate or work with qualified operators or support teams to validate corrective actions and demonstrate satisfactory operating condition.

　　Must be able to read, interpret and follow intricate and complex blueprints, schematics and instruction manuals as they apply to the hydraulic, pneumatic and electro-mechanical apparatus of the CNC machine tools and manufacturing process equipment.

　　Responsible for performing preventive maintenance on all CNC and conventional machines, process equipment and incorporate modifications and revisions when required. Required to update documentation as required.

　　Performs duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, Fall Protection/Arrest, hot work permits, and NFPA 70e. Keep facilities, materials and work areas clean and orderly, exercise good housekeeping practices.

　　Must be able to utilize complex electronic, hydraulic and mechanical test equipment such as oscilloscopes, recorders, VOMs, vernier calipers, micrometers, dial indicators, ball bars, laser alignment tools, electronic levels and other test equipment as required.

　　Must actively participate in a team based environment which includes, but not limited to the following: active participation in daily team meetings and activities, cooperates and relates well with others, practices direct professional communication with team members, and is open to new ideas from team members and considers opinions different from their own.

　　In the team environment, a maintenance team coordinator role needs to be designated in routine and emergency situations and may be required as needed on each shift. Collaboration between the maintenance coordinator role and the team is required to ensure group viability, shift accountability, and to provide effective customer support.

　　QUALIFICATIONS/REQUIREMENTS

　　High school diploma or equivalent required. Shop Math, including Algebra, Geometry, Decimals and Fractions. Ability to demonstrate effective oral and written communication skills.

　　Strong knowledge of mechanics and the mechanical fit of components, assemblies and sub-assemblies as applied to the precision tolerances required for maintaining and/or restoring the CNC machines to O.E.M. specifications.

　　Must have experience in at least one of the following:

　　Installation and precision alignment of machine tool mechanism

　　Ability to perform mechanical scraping of machine tool ways, bearing, and mating surfaces to support rebuild, repair, and maintenance of production equipment.

　　Ball screw replacement

　　Gearbox rebuild

　　Linear guide replacement

　　Spindle rebuild/replacement

　　Two years’ experience in troubleshooting, diagnosing, and repairing electrical and mechanical equipment.

　　Minimum Two years of practical experience troubleshooting the repair of CNC machines, or equivalent.

　　Experience reading and interpreting complex mechanical drawings, schematics, instruction manuals, diagrams and N/C and PLC (ladder) programs.

　　Working knowledge of typical testing equipment devices such as oscilloscopes, meggar, multimeter, ball bar, or laser alignment.

　　Experience performing duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, hot work permits, and NFPA 70e.

　　Considerable physical effort will be applied in machine and equipment repair. Intermittent lifting of up to 50 pounds and manipulating bulky subassemblies and parts/ tooling. Exposure to awkward positions (bending, stooping, climbing) during maintenance tasks.

　　Must be able to climb and work at elevated levels.

　　Must have good manual dexterity, and ability to use various hand tools and gages.

　　Basic computer and keyboarding skills.

　　DESIRED CHARACTERISTICS

　　Associates degree in technical field or trade school certificate desired.

　　MS Office knowledge.

　　Experience coordinating the efforts of other resources to facilitate task or project closure.

　　Experience participating in a high performance team based environment.

　　WORKING CONDITIONS

　　Continuous analytical ability required to troubleshoot complex electro/mechanical equipment, interpret and effectively utilize complex prints, schematics and instructions for equipment maintenance.

　　The work will be diversified and complex. Work demands a high degree of attention to detail, concentration, and judgment.

　　Considerable physical effort will be applied in machine and equipment repair. Intermittent lifting of up to 50 pounds and manipulating bulky subassemblies and parts/ tooling. Exposure to awkward positions (bending, stooping, climbing) during maintenance tasks.

　　Utilize good manual dexterity, and ability to use various hand tools and gages.

　　Work with ladders, pits, platforms, and scaffolds. Must be able to climb and work at elevated levels.

　　Exposure to chemicals while using proper PPE and following safety procedures.

　　May work with voltages, up to 480 volts while using proper PPE and following safety procedure.

　　Required to work shift work in accordance with business needs.

　　Will be expected to respond to scheduled overtime, hold over or emergency call-in as required.

　　Will be required to carry a company issued cell phone or radio while working on site.

　　May be required to work in inclement conditions.

　　GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer (https://www.eeoc.gov/sites/default/files/2022-10/22-088_EEOC_KnowYourRights_10_20.pdf) . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

　　GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

　　Relocation Assistance Provided: Yes