Job Description Purpose and Scope: Responsible for inspecting, training personnel, and performing organizational, intermediate and depot level maintenance and modification on contract units, sub-systems, support equipment and related weapons system. Advise team members and solve unusual maintenance problems by analysis and test engines, pneudraulic, fuel, electrical/electronic systems, etc. Essential Responsibilities include but not limited to: Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines engines for oil leaks, and listens to operating engine to detect and diagnose malfunctions, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments.Replaces and repairs damaged components, uses hand tools, gauges, and tests equipment.Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills.Repairs, replaces, and rebuilds equipment and engine components, fuel systems (including cells, tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, and drills.Reads and interprets maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.Diagnoses malfunctions, isolate causes and correct breaks.Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction.Replaces or repairs worn or damaged components, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft.Adjusts, repairs, or replaces electrical wiring system, instruments, electrical/electronics, fuel/oil systems, and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair.Perform all other position related duties as assigned or requested. Minimum Position Knowledge, Skills, and Abilities Required: High school graduate or equivalent is desirable. Five (5) years actual and recent, systems experience desired; Three (3) years required.Requires electronics specialty. Thorough knowledge of technical publications related to weapon systems and vehicles. Must have knowledge of the scope and limitation of various categories of maintenance and their application to the contract unit. Must know theory and principles of engine operations; accessories and components; electrical and electronic; pneudraulic; and mechanical principles. Knowledge of sheet metal, properties of materials, fuels, and oils. Must be able to read, interpret and use manufacturer’s maintenance manuals, service bulletins, blueprints, wiring and schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must be able to inspect, repair, and operate ground support and auxiliary equipment.Must be able to obtain and maintain Government security clearance.Must have qualifications and schooling prior to employment.If military experience, provide JST. If A&P License, provide license.May be required to be licensed by Federal Aviation Administration.Must read, write, speak, and understand English.

　　Additional Job DescriptionAdditional Job Description Work Environment, Physical Demands, and Mental Demands: Work is performed in a shop environment that is moderately lighted, heated and ventilated, is exposed to disagreeable fumes and to cuts and bruises from using tools in close placed and hazards of moving vehicles such as forklifts and sweepers in shop area. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. The employee is occasionally required to sit, climb or balance, and taste or smell. Frequently lifts items weighing 40-45 pounds and occasionally in excess of 50 pounds. The employee is frequently exposed to moving mechanical parts, extreme heat, and vibration. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud or unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.Support Customer and Contract for all related tasks associated with this position.Enforce company policy and procedures as they apply to ensuring a safe and high-level customer service work environment always exists, reporting to the Program Supervisor as required.Report incidents and make recommendations to the Program Supervisor.Full flexibility regarding working hoursThis position description is not intended to be all-inclusive and employee will also perform other tasks as assigned.Must be able to work well with others and independently, predicated on the scope and complexity of operations.Tools are the responsibility of the employee.

　　Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

　　Labor Law Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs)

　　EEO including Disability/Protected Veterans